TJ250/45 Copper Flat Wire Line
Continuous Extrusion Machine for Copper Wire, Strip and Flat Wire
This product has been discontinued and removed from our shelves.
6. Guide pulley 7. Takeup machine 8. Hydraulic and lubrication system 9. Electric control cabinet 10. Operation console
This continuous rotary extrusion line is suitable for producing flat copper wires with ultra small sections. The sectional area is about 2.5m2. The extruded products can be used to form enameled transposed conductors which are often used in EHV transformers.
Additionally, this range of continuous rotary extrusion machine is also commonly utilized to produce copper flat wires for use in motors, high power transformers, as well as industries such as military and aerospace, etc.
| Main Functional Unit: Continuous Extrusion Machine | |
| Model | TJ250 |
| Nominal Diameter of Extrusion Wheel | 250 mm |
| Rated Rotation Speed | 11RPM |
| Power of Main Motor | 45kW |
| Feed Stock (Copper Rod) | |
| Diameter | Φ 8.0 mm |
| Diameter Tolerance | ±0.2mm |
| Yield Strength | 160MPa (Oxygen-free Copper Rod Produced by Upward Casting Process) |
| End Product : Flat Copper Wires | |
| Sectional Area Range | 2.5-60mm² |
| Max. Width | 15mm |
| Standard | Conforms to GB5585.1-85 standard |
| Entire Production Line: Copper Wire Production Line | |
| Average Output | 100-150kg/h |
| Installed Capacity | 380V, 3 phase, 75KVA |
| Flash Amount | 1-2% |
| Workshop | |
| Minimum Dimension | Length: 22m, Width: 7 m, Height: 4 m |
| Cooling Water | 30 m3/h (Cooling Tower) |
| Compressed Air | 0.7 MPa, 1 m3/min |
| Operator | 2 |
| Copper Rod Payoff Machine | one set |
| Copper Rod Straightening Machine | one set |
| Copper Continuous Extrusion Machine | one set |
| Cooling and Oxidation-Prevention System (with Blow-drying Function) | one set |
| Meter Counter | two sets |
| Takeup Machine (630mm-800mm) | two sets |
| Electrical Control System (with Touch Screen) | one set |
| Hydraulic and Lubrication System | one set |
- The TJ250/45 flat copper wire continuous rotary extrusion line uses the Φ8mm oxygen-free copper rod made by the upward casting technique as the raw material. This material can be easily prepared.
- With special extrusion die design, this continuous extrusion equipment supports extrusion of two wires at the same time. This improves the production efficiency and dramatically cuts down the production cost.
- The extruded wires eliminate the need for further processing such as drawing, rolling, or annealing. While ensuring quality, the production cost and investment cost are both degreased.
Continuous Extrusion Machine, Copper Extrusion Line, Continuous Rotary Extrusion Equipment Manufacturer
Aibang Machinery Technology Co., Ltd. is a Chinese manufacturer of continuous rotary extrusion lines for copper and aluminum products. These production lines are available with different specifications and can produce yields such as the aluminum tube, copper flat wire, soft aluminum section wire, and the copper busbar and profile. Also available are continuous rotary extrusion equipment for producing aluminum clad steel wires.
Changzhou Aibang Machinery & Science Technology Co., Ltd.
Add.: No. 279, Huanghe West Road, Xinbei District, Changzhou City, Jiangsu Province
Contact Person: Bangjun Shu
Tel.: +86-519-85960370
Mobile:+86-13506124377
WhatsApp/ Wechat:+86-13506124377
Fax: +86-519-81580370
E-mail: czsbj1004@126.com